 |
RaptorFin MG08
Maximize the performance of your trolling motor in the toughest fishing conditions with RaptorFin™. The vertical "fin" acts as a rudder, improving steering and stability while drifting and under power. The curved shield acts as a sea anchor, keeping the bow of your boat steady in rough water.
RaptorFin™ MG08 is designed to fit the following MotorGuide® trolling motors with a 3 1/2" propeller hub diameter.
Fits MotorGuide® Models:
DS54
DS71
DS82
DS109
FW54
FW71
FW82
FW109
PTSV82
PTSV109
SW54
SW71
SW82
SW109
TR54
TR70
TR82
TR109
W75 Wireless
W75SW Wireless
For optimum performance install RaptorFin™ to trolling motors directly mounted to the bow of the boat. RaptorFin™ is not recommended for trolling motors affixed with "quick release" or removable mounting systems.
Price: $139.99
|
|
|
 |
RaptorFin MK04
Maximize the performance of your trolling motor in the toughest fishing conditions with RaptorFin™. The vertical "fin" acts as a rudder, improving steering and stability while drifting and under power. The curved shield acts as a sea anchor, keeping the bow of your boat steady in rough water.
RaptorFin™ MK04 is designed to fit the following Minn Kota® trolling motors with a 3 5/8" motor diameter.
Fits Minn Kota® Models:
55AT
Edge 55
55PD/AP
55AP
55PD
RT 55SP
RT 70 SP
70AP
70PD
70PD/AP
For optimum performance install RaptorFin™ to trolling motors directly mounted to the bow of the boat. RaptorFin™ is not recommended for trolling motors affixed with "quick release" or removable mounting systems.
Price: $139.99
|
|
|
 |
RaptorFin MK07
Maximize the performance of your trolling motor in the toughest fishing conditions with RaptorFin™. The vertical "fin" acts as a rudder, improving steering and stability while drifting and under power. The curved shield acts as a sea anchor, keeping the bow of your boat steady in rough water.
RaptorFin™ MK07 is designed to fit the following Minn Kota® trolling motors with a 4" motor diameter.
Fits Minn Kota® Models:
74PD
80PD
80AP
80PD/AP
RT 80/PD
RT 80/AP
RT 80/ST
RT 101/ST
For optimum performance install RaptorFin™ to trolling motors directly mounted to the bow of the boat. RaptorFin™ is not recommended for trolling motors affixed with "quick release" or removable mounting systems.
Price: $139.99
|
|
|
 |
RaptorFin™ MK08
Maximize the performance of your trolling motor in the toughest fishing conditions with RaptorFin™. The vertical "fin" acts as a rudder, improving steering and stability while drifting and under power. The curved shield acts as a sea anchor, keeping the bow of your boat steady in rough water.
RaptorFin™ MK08 is designed to fit the following, direct mount, Minn Kota® trolling motors with a 4" motor diameter.
Fits Minn Kota® Models:
Max 74
Max 80
Max 101
Max Pro 80
Max Pro 101
RiptidePro 80/H
Riptide Pro 101/H
RT 80/SM
RT 101/SM
For optimum performance install RaptorFin™ to trolling motors directly mounted to the bow of the boat. RaptorFin™ is not recommended for trolling motors affixed with "quick release" or removable mounting systems.
Price: $139.99
|
|
|
 |
6½" 1 oz. Dual Blade Bucktail or Marabou (Raptor Fishing Technologies)
This lure is light enough to cast over vegetation with a 2nd blade for added flash. Great choice for trophy bass!
Every RaptorTail™ is built on our exclusive FlexCable™ chassis using aircraft-grade 250 lb test cable and sleeves which gives the RaptorTail™ the incredible strength and lifelike motion required to attract and land trophy fish. The no-kink FlexCable™ chassis produces fewer fouled casts, improves hook set, and best of all... there's no tuning required!
Price: $12.40
|
Choose Color Combination
|
|
 |
6½" 1.25 oz. Single Blade weighted Bucktail or Marabou (Raptor Fishing Technologies)
The classic bucktail, with a twist. A twist, turn, and a bend, but never a kink! Weighted with 5 ounces of solid brass machined to maintain perfect balance.
Every RaptorTail™ is built on our exclusive FlexCable™ chassis using aircraft-grade 250 lb test cable and sleeves which gives the RaptorTail™ the incredible strength and lifelike motion required to attract and land trophy fish. The no-kink FlexCable™ chassis produces fewer fouled casts, improves hook set, and best of all... there's no tuning required!
Price: $12.95
|
Choose Color Combination
|
|
 |
7½" 1.25 oz. Dual Blade Bucktail or Marabou (Raptor Fishing Technologies)
The second blade adds just enough lift to bulg the surface. Try two different blade colors for a truly unique combination.
Every RaptorTail™ is built on our exclusive FlexCable™ chassis using aircraft-grade 250 lb test cable and sleeves which gives the RaptorTail™ the incredible strength and lifelike motion required to attract and land trophy fish. The no-kink FlexCable™ chassis produces fewer fouled casts, improves hook set, and best of all... there's no tuning required!
Price: $15.50
|
Choose Color Combinations
|
|
 |
7½" 1.50 oz Single Blade weighted Bucktail or Marabou (Raptor Fishing Technologies)
Heavy enough to pitch into the wind, yet remarkably easy to cast all day. The Flexcable™ chassis keeps the kink out, and the solid brass weight keeps the lead out.
Every RaptorTail™ is built on our exclusive FlexCable™ chassis using aircraft-grade 250 lb test cable and sleeves which gives the RaptorTail™ the incredible strength and lifelike motion required to attract and land trophy fish. The no-kink FlexCable™ chassis produces fewer fouled casts, improves hook set, and best of all... there's no tuning required!
Price: $15.50
|
Choose Color Combination
|
|
 |
10" 2.10 oz Single Blade w/offset hook bracket Bucktail or Marabou (Raptor Fishing Technologies)
The largest lures in the RaptorTail™ line feature our exclusive offset hook bracket which positions the hook away from the lure body to minimize fouling and maximize hook set.
Every RaptorTail™ is built on our exclusive FlexCable™ chassis using aircraft-grade 250 lb test cable and sleeves which gives the RaptorTail™ the incredible strength and lifelike motion required to attract and land trophy fish. The no-kink FlexCable™ chassis produces fewer fouled casts, improves hook set, and best of all... there's no tuning required!
Price: $23.95
|
Choose Color Combination
|
|
 |
10" 2.50 oz Dual Blade w/offset hook bracket Bucktail or Marabou (Raptor Fishing Technologies)
The largest lures in the RaptorTail™ line feature our exclusive offset hook bracket which positions the hook away from the lure body to minimize fouling and maximize hook set.
Every RaptorTail™ is built on our exclusive FlexCable™ chassis using aircraft-grade 250 lb test cable and sleeves which gives the RaptorTail™ the incredible strength and lifelike motion required to attract and land trophy fish. The no-kink FlexCable™ chassis produces fewer fouled casts, improves hook set, and best of all... there's no tuning required!
Price: $24.50
|
Choose Color Combination
|
|
 |
RaptorCap HU700 (Raptor Fishing Technologies)
Humminbird® Models
The RaptorCap improves screen visibility by blocking the suns glare while protecting your fishing electronics from weather conditions. Constructed of UV resistant, high performance thermoplastic; with a smooth black exterior to compliment your fishing electronics and a non-reflective interior finish to absorb light. The rigid one-piece design is easy to install using an adhesive Velcro system. Special design features include a rolled edge to divert rain and sea spray away from your electronic screen and keypad, and a weather seal for added protection.
This RaptorCap model is designed to custom fit the specific fishing electronics below.
Fits Humminbird® Models:
717
727
737
747c
755c chartplotter
757c combo
767 combo
777c combo
777c2
785c chartplotter NVB
785c2i chartplotter NVB
785c2 chartplotter
787c combo
787c2 combo
787c2i combo NVB
797c2SI combo
797c2 combo NVB
Use the Raptor Cap Cross Reference to find the cap that fits.
Price: $24.99
|
|
|
 |
RaptorCap HU900 (Raptor Fishing Technologies)
Humminbird® Models
The RaptorCap improves screen visibility by blocking the suns glare while protecting your fishing electronics from weather conditions. Constructed of UV resistant, high performance thermoplastic; with a smooth black exterior to compliment your fishing electronics and a non-reflective interior finish to absorb light. The rigid one-piece design is easy to install using an adhesive Velcro system. Special design features include a rolled edge to divert rain and sea spray away from your electronic screen and keypad, and a weather seal for added protection.
This RaptorCap model is designed to custom fit the specific fishing electronics below.
Fits Humminbird® Models:917c combo
931c
931c df
937c
937c combo
937c df
947c 3D combo
955 c chartplotter
957 c combo
967 c 3D combo
981cSI
987cSI combo
997cSI combo
Use the Raptor Cap Cross Reference to find the cap that fits.
Price: $24.99
|
|
|
 |
RaptorCap VXL300 (Raptor Fishing Technologies)
Vexilar® Models
The RaptorCap improves screen visibility by blocking the suns glare while protecting your fishing electronics from weather conditions. Constructed of UV resistant, high performance thermoplastic; with a smooth black exterior to compliment your fishing electronics and a non-reflective interior finish to absorb light. The rigid one-piece design is easy to install using an adhesive Velcro system. Special design features include a rolled edge to divert rain and sea spray away from your electronic screen and keypad, and a weather seal for added protection.
This RaptorCap Glare Guard model is designed to custom fit the specific fishing electronics below.
Fits VEXILAR® Models:
FL-12
FL-20
Use the Raptor Cap Cross Reference to find the cap that fits.
Price: $24.99
|
|
|
 |
RaptorCap GA63 (Raptor Fishing Technologies)
RaptorCap Glare Guard, Garmin® Fishfinder Models
The RaptorCap improves screen visibility by blocking the suns glare while protecting your fishing electronics from weather conditions. Constructed of UV resistant, high performance thermoplastic; with a smooth black exterior to compliment your fishing electronics and a non-reflective interior finish to absorb light. The rigid one-piece design is easy to install using an adhesive Velcro system. Special design features include a rolled edge to divert rain and sea spray away from your electronic screen and keypad, and a weather seal for added protection.
This RaptorCap model is designed to custom fit the specific fishing electronics below.
Fits Garmin® Models:
Fishfinder® 160 and 160 blue
Fishfinder® 240 and 240 blue
GPS Map® 178c
Use the Raptor Cap Cross Reference to find the cap that fits.
Price: $24.99
|
|
|
 |
RaptorCap HU050 (Raptor Fishing Technologies)
RaptorCap Glare Guard, Humminbird® Models
The RaptorCap improves screen visibility by blocking the suns glare while protecting your fishing electronics from weather conditions. Constructed of UV resistant, high performance thermoplastic; with a smooth black exterior to compliment your fishing electronics and a non-reflective interior finish to absorb light. The rigid one-piece design is easy to install using an adhesive Velcro system. Special design features include a rolled edge to divert rain and sea spray away from your electronic screen and keypad, and a weather seal for added protection.
This RaptorCap model is designed to custom fit the specific fishing electronics below.
Fits Humminbird® Models:
PiranahMax® 30 Portable
PiranahaMax® 20
PiranahaMax® 15
PiranahaMax® 10
Use the Raptor Cap Cross Reference to find the cap that fits.
Price: $19.99
|
|
|
 |
RaptorCap HU500 (Raptor Fishing Technologies)
RaptorCap Glare Guard, Humminbird® Models
The RaptorCap improves screen visibility by blocking the suns glare while protecting your fishing electronics from weather conditions. Constructed of UV resistant, high performance thermoplastic; with a smooth black exterior to compliment your fishing electronics and a non-reflective interior finish to absorb light. The rigid one-piece design is easy to install using an adhesive Velcro system. Special design features include a rolled edge to divert rain and sea spray away from your electronic screen and keypad, and a weather seal for added protection.
This RaptorCap model is designed to custom fit the specific fishing electronics below.
Fits Humminbird® Models:
595c combo
585c
565
535
535pt
525
515
Matrix® 87
Matrix® 77
Matrix® 67
Matrix® 65
Matrix® 55
Matrix® 47
Matrix® 37
Matrix® 35
Matrix® 27
Matrix® 25
Matix® 20 portable
Matrix® 15
Matrix® 17
Matrix® 12
Matrix® 10
Use the Raptor Cap Cross Reference to find the cap that fits.
Price: $24.99
|
|
|
| |
RaptorCap HUWE (Raptor Fishing Technologies)
RaptorCap Glare Guard, Humminbird® Models
The RaptorCap improves screen visibility by blocking the sun's glare while protecting your fishing electronics from weather conditions. Constructed of UV resistant, high performance thermoplastic; with a smooth black exterior to compliment your fishing electronics and a non-reflective interior finish to absorb light. The rigid one-piece design is easy to install using an adhesive Velcro system. Special design features include a rolled edge to divert rain and sea spray away from your electronic screen and keypad, and a weather seal for added protection.
This RaptorCap model is designed to custom fit the specific fishing electronics below.
Fits Humminbird® Models:
Wide Eye
Wide W
Wide One Hundred
Wide One
Use the Raptor Cap Cross Reference to find the cap that fits.
Price: $24.99
|
|
|
 |
RaptorCap LOEA100 (Raptor Fishing Technologies)
RaptorCap Glare Guard, Lowrance® & Eagle® Models
The RaptorCap improves screen visibility by blocking the suns glare while protecting your fishing electronics from weather conditions. Constructed of UV resistant, high performance thermoplastic; with a smooth black exterior to compliment your fishing electronics and a non-reflective interior finish to absorb light. The rigid one-piece design is easy to install using an adhesive Velcro system. Special design features include a rolled edge to divert rain and sea spray away from your electronic screen and keypad, and a weather seal for added protection.
This RaptorCap Glare Guard model is designed to custom fit the specific fishing electronics below.
Fits LOWRANCE® Models:
X37TX
X50 DS
M52 S/GPS?
M52I S/GPS
M52 S/GPS
M56 S/MAP
M56i S/MAP
M68c S/MAP
M68c S/MAP ice machine™
M68i S/MAP
X47
X47TX
X67c
X67c ice
Fits EAGLE® Models:
FishEasy® 320C
FishEasy® 245 DS
FishEasy® 240
CUDA® 250 S/Map
CUDA® 242
Cuda® 240 S/GPS
Cuda® 240i S/GPS
Cuda® 168
Cuda® 128
SeaFinder® 245 DS
Use the Raptor Cap Cross Reference to find the cap that fits.
Price: $19.99
|
|
|
 |
RaptorCap LOEA300 (Raptor Fishing Technologies)
RaptorCap Glare Guard, Lowrance® & Eagle® Models
The RaptorCap improves screen visibility by blocking the suns glare while protecting your fishing electronics from weather conditions. Constructed of UV resistant, high performance thermoplastic; with a smooth black exterior to compliment your fishing electronics and a non-reflective interior finish to absorb light. The rigid one-piece design is easy to install using an adhesive Velcro system. Special design features include a rolled edge to divert rain and sea spray away from your electronic screen and keypad, and a weather seal for added protection.
This RaptorCap Glare Guard model is designed to custom fit the specific fishing electronics below.
Fits LOWRANCE® Models:
LMS-240
LMS-320
LMS-320df
LMS-330c
LMS-332c
LMS-335c df
LMS-337c df
LMS-480m
LMS-480mdf
X87
X88df
X97
X98df
X100c
X102c
X105c df
X107c df
X125
X126df
X135
X136df
X47ex
X96
X96TX
GlobalMap® 2400
GlobalMap® 3200
GlobalMap® 3300C
GlobalMap® 3500c
GlobalMap® 3600c iGPS
GlobalMap® 4800m
GlobalMap® baja 480c
GlobalMap® baja
Fits Eagle Models:
SeaCharter® 642C DF iGPS SeaCharter® 640C DF
SeaCharter® 502C DF iGPS
SeaCharter® 500C DF
SeaCharter® 480DF
SeaCharter® 320DF
SeaFinder® 640C DF
SeaFinder® 500C DF
SeaFinder® 480DF
SeaFinder® 320DF
SeaFinder® 250 DF
FishElite® 642C iGPS
FishElite® 640C
FishElite® 502C iGPS
FishElite® 500C
FishElite® 480
FishElite® 320
FishElite® 320DF
FishEasy® 250 DS
FishMark® 640C
Fishmark® 500C
Fishmark® 480
Fishmark® 320
Fishmark® 240
Fishmark® 160
Cuda® 168EX
IntelliMap® 642C iGPS
IntelliMap® 640C
IntelliMap® 502C iGPS
IntelliMap® 500C
IntelliMap® 480
IntelliMap® 320
Use the Raptor Cap Cross Reference to find the cap that fits.
Price: $24.99
|
|
|
 |
RaptorCap LOEA400 (Raptor Fishing Technologies)
RaptorCap Glare Guard, Lowrance® & Eagle® Models
The RaptorCap improves screen visibility by blocking the suns glare while protecting your fishing electronics from weather conditions. Constructed of UV resistant, high performance thermoplastic; with a smooth black exterior to compliment your fishing electronics and a non-reflective interior finish to absorb light. The rigid one-piece design is easy to install using an adhesive Velcro system. Special design features include a rolled edge to divert rain and sea spray away from your electronic screen and keypad, and a weather seal for added protection.
This RaptorCap Glare Guard model is designed to custom fit the specific fishing electronics below.
Fits LOWRANCE® Models:
LCX-15 CI/CT
LCX-15 MT
LCX-16 CI
LCX-17m
LCX-18c
LCX-19c
LCX-20c
LCX-25c
LCX-26c hd
GlobalMap® 3000MT
GlobalMap® 4000
GlobalMap® 4900m
GlobalMap® 5000c
GlobalMap® 5500c
GlobalMap® 6000c
GlobalMap® 6500c
GlobalMap® 6600c hd
Fits EAGLE® Models:
SeaChamp® 2000C DF
SeaChamp® 1000C DF
FishStrike® 2000C
FishStrike® 1000C
Use the Raptor Cap Cross Reference to find the cap that fits.
Price: $29.99
|
|
|
 |
RaptorCap LOEA500 (Raptor Fishing Technologies)
RaptorCap Glare Guard, Lowrance® Models
The RaptorCap improves screen visibility by blocking the suns glare while protecting your fishing electronics from weather conditions. Constructed of UV resistant, high performance thermoplastic; with a smooth black exterior to compliment your fishing electronics and a non-reflective interior finish to absorb light. The rigid one-piece design is easy to install using an adhesive Velcro system. Special design features include a rolled edge to divert rain and sea spray away from your electronic screen and keypad, and a weather seal for added protection.
This RaptorCap model is designed to custom fit the specific fishing electronics below.
Fits Lowrance® Models:
LCX-104C
LCX-110c
LCX-111c hd
GlobalMap® 7000c
GlobalMap® 7500c
GlobalMap® 7600c hd
Use the Raptor Cap Cross Reference to find the cap that fits.
Price: $39.99
|
|
